A program to do helical interpolation on a Nomura NN20-YB Swiss CNC with a Mitsubishi Meldas PLC. Why don't some of you nerdcore muthafuckas google it and learn a new career. -- Slipped Moebius mhm28x9
On Tue, 29 Jan 2008 14:49:35 -0800, Slipped Moebius wrote: > A program to do helical interpolation on a Nomura NN20-YB Swiss CNC > with a Mitsubishi Meldas PLC. > > Why don't some of you nerdcore muthafuckas google it and learn a new > career. What helices are you interpolating, and why? -- tinmimus99@hotmail.com smeeter 11 or maybe 12 mp 10 mhm 29x13 "It's a Boo--!" < _The Hunting of the Snark_
On Jan 29, 5:11 pm, mimus <tinmimu...@hotmail.com> wrote: > On Tue, 29 Jan 2008 14:49:35 -0800, Slipped Moebius wrote: > > A program to do helical interpolation on a Nomura NN20-YB Swiss CNC > > with a Mitsubishi Meldas PLC. > > > Why don't some of you nerdcore muthafuckas google it and learn a new > > career. > > What helices are you interpolating, and why? > I'm trying to ream a hole (hold the laughter) through 3/4" 17-4 precipitation hardened steel at .251" diameter keeping a tolerance of +/- .001" _without_ using a reamer, instead using an endmill probably about .247" diameter. The hole is cross-drilled, using the x-y axes, BTW. KTHX. Teh Helix Would Be: Start Point UP here, End Point DOWN Here, Wit LOtso Squiggly's Along TEh way. -- Slipped Moebius mhm28x9
On Tue, 29 Jan 2008 20:53:19 -0800, Slipped Moebius wrote: > On Jan 29, 5:11 pm, mimus <tinmimu...@hotmail.com> wrote: > >> On Tue, 29 Jan 2008 14:49:35 -0800, Slipped Moebius wrote: >> >> > A program to do helical interpolation on a Nomura NN20-YB Swiss CNC >> > with a Mitsubishi Meldas PLC. >> >> > Why don't some of you nerdcore muthafuckas google it and learn a new >> > career. >> >> What helices are you interpolating, and why? > > I'm trying to ream a hole (hold the laughter) through 3/4" 17-4 > precipitation hardened steel at .251" diameter keeping a tolerance of > +/- .001" _without_ using a reamer, instead using an endmill probably > about .247" diameter. The hole is cross-drilled, using the x-y axes, > BTW. KTHX. > > Teh Helix Would Be: Start Point UP here, End Point DOWN Here, Wit > LOtso Squiggly's Along TEh way. <scratch> What did you do with your reamer? -- tinmimus99@hotmail.com smeeter 11 or maybe 12 mp 10 mhm 29x13 Let's get the hell out of here while we can still pass our Rorschasch tests. < _The Last Happy Hour_
"Slipped Moebius" <erroneouscorrection@yahoo.com> wrote in message news:6ce0ad4d-b5c3-407c-8468-691954400ed6@q21g2000hsa.googlegroups.com... > On Jan 29, 5:11 pm, mimus <tinmimu...@hotmail.com> wrote: > > On Tue, 29 Jan 2008 14:49:35 -0800, Slipped Moebius wrote: > > > A program to do helical interpolation on a Nomura NN20-YB Swiss CNC > > > with a Mitsubishi Meldas PLC. > > > > > Why don't some of you nerdcore muthafuckas google it and learn a new > > > career. > > > > What helices are you interpolating, and why? > > > I'm trying to ream a hole (hold the laughter) through 3/4" 17-4 > precipitation hardened steel at .251" diameter keeping a tolerance of > +/- .001" _without_ using a reamer, instead using an endmill probably > about .247" diameter. The hole is cross-drilled, using the x-y axes, > BTW. KTHX. > > Teh Helix Would Be: Start Point UP here, End Point DOWN Here, Wit > LOtso Squiggly's Along TEh way. My late ex-husband was an R&D machinist and used to make something that sounds like that. He called them impellers. He said they were hideously difficult to set up. Smee > -- > Slipped Moebius > mhm28x9
On Tue, 29 Jan 2008 23:47:51 -0800, pscissons wrote: > "Slipped Moebius" <erroneouscorrection@yahoo.com> wrote in message > news:6ce0ad4d-b5c3-407c-8468-691954400ed6@q21g2000hsa.googlegroups.com... > >> On Jan 29, 5:11 pm, mimus <tinmimu...@hotmail.com> wrote: >> >> > On Tue, 29 Jan 2008 14:49:35 -0800, Slipped Moebius wrote: >> > >> > > A program to do helical interpolation on a Nomura NN20-YB Swiss CNC >> > > with a Mitsubishi Meldas PLC. >> > >> > > Why don't some of you nerdcore muthafuckas google it and learn a >> > > new career. >> > >> > What helices are you interpolating, and why? >> >> I'm trying to ream a hole (hold the laughter) through 3/4" 17-4 >> precipitation hardened steel at .251" diameter keeping a tolerance of >> +/- .001" _without_ using a reamer, instead using an endmill probably >> about .247" diameter. The hole is cross-drilled, using the x-y axes, >> BTW. KTHX. >> >> Teh Helix Would Be: Start Point UP here, End Point DOWN Here, Wit LOtso >> Squiggly's Along TEh way. > > My late ex-husband was an R&D machinist and used to make something that > sounds like that. He called them impellers. He said they were hideously > difficult to set up. > > Smee Whatever happened to casting? do the mold once and fuggedaboudit. -- tinmimus99@hotmail.com smeeter 11 or maybe 12 mp 10 mhm 29x13 You want a job and a lizard to ride? < _The Einstein Intersection_
<pscissons@sbcglobal.net> wrote in news:nVVnj.1879$uE.86 @newssvr22.news.prodigy.net: > > "Slipped Moebius" <erroneouscorrection@yahoo.com> wrote in message > news:6ce0ad4d-b5c3-407c-8468-691954400ed6@q21g2000hsa.googlegroups.com... >> On Jan 29, 5:11 pm, mimus <tinmimu...@hotmail.com> wrote: >> > On Tue, 29 Jan 2008 14:49:35 -0800, Slipped Moebius wrote: >> > > A program to do helical interpolation on a Nomura NN20-YB Swiss CNC >> > > with a Mitsubishi Meldas PLC. >> > >> > > Why don't some of you nerdcore muthafuckas google it and learn a new >> > > career. >> > >> > What helices are you interpolating, and why? >> > >> I'm trying to ream a hole (hold the laughter) through 3/4" 17-4 >> precipitation hardened steel at .251" diameter keeping a tolerance of >> +/- .001" _without_ using a reamer, instead using an endmill probably >> about .247" diameter. The hole is cross-drilled, using the x-y axes, >> BTW. KTHX. >> >> Teh Helix Would Be: Start Point UP here, End Point DOWN Here, Wit >> LOtso Squiggly's Along TEh way. > > My late ex-husband was an R&D machinist and used to make something that > sounds like that. He called them impellers. He said they were hideously > difficult to set up. > > Smee > i saw you name and i thought good..Smee is going to pointy stick them for being way to technical jargon-wise to poast this here. but no... no pointy stick and i am sure what you said made some sense to them. them being those jargon speaking smart in math and stuff bastards. thinking where is my pointy stick to pointy stick the lot of you. headkase
"mimus" <tinmimus99@hotmail.com> wrote in message news:LZGdnVaKQ4iRJz3anZ2dnUVZ_judnZ2d@giganews.com... > On Tue, 29 Jan 2008 23:47:51 -0800, pscissons wrote: > > > "Slipped Moebius" <erroneouscorrection@yahoo.com> wrote in message > > news:6ce0ad4d-b5c3-407c-8468-691954400ed6@q21g2000hsa.googlegroups.com... > > > >> On Jan 29, 5:11 pm, mimus <tinmimu...@hotmail.com> wrote: > >> > >> > On Tue, 29 Jan 2008 14:49:35 -0800, Slipped Moebius wrote: > >> > > >> > > A program to do helical interpolation on a Nomura NN20-YB Swiss CNC > >> > > with a Mitsubishi Meldas PLC. > >> > > >> > > Why don't some of you nerdcore muthafuckas google it and learn a > >> > > new career. > >> > > >> > What helices are you interpolating, and why? > >> > >> I'm trying to ream a hole (hold the laughter) through 3/4" 17-4 > >> precipitation hardened steel at .251" diameter keeping a tolerance of > >> +/- .001" _without_ using a reamer, instead using an endmill probably > >> about .247" diameter. The hole is cross-drilled, using the x-y axes, > >> BTW. KTHX. > >> > >> Teh Helix Would Be: Start Point UP here, End Point DOWN Here, Wit LOtso > >> Squiggly's Along TEh way. > > > > My late ex-husband was an R&D machinist and used to make something that > > sounds like that. He called them impellers. He said they were hideously > > difficult to set up. > > > > Smee > > Whatever happened to casting? do the mold once and fuggedaboudit. Prototypes. Smee > > -- > tinmimus99@hotmail.com > > smeeter 11 or maybe 12 > > mp 10 > > mhm 29x13 > > You want a job and a lizard to ride? > > < _The Einstein Intersection_ >
On Wed, 30 Jan 2008 23:54:22 -0800, pscissons wrote: > "mimus" <tinmimus99@hotmail.com> wrote in message > news:LZGdnVaKQ4iRJz3anZ2dnUVZ_judnZ2d@giganews.com... > >> On Tue, 29 Jan 2008 23:47:51 -0800, pscissons wrote: >> >> > "Slipped Moebius" <erroneouscorrection@yahoo.com> wrote in message >> > > news:6ce0ad4d-b5c3-407c-8468-691954400ed6@q21g2000hsa.googlegroups.com... >> > >> >> On Jan 29, 5:11 pm, mimus <tinmimu...@hotmail.com> wrote: >> >> >> >> > On Tue, 29 Jan 2008 14:49:35 -0800, Slipped Moebius wrote: >> >> > >> >> > > A program to do helical interpolation on a Nomura NN20-YB Swiss CNC >> >> > > with a Mitsubishi Meldas PLC. >> >> > >> >> > > Why don't some of you nerdcore muthafuckas google it and learn a >> >> > > new career. >> >> > >> >> > What helices are you interpolating, and why? >> >> >> >> I'm trying to ream a hole (hold the laughter) through 3/4" 17-4 >> >> precipitation hardened steel at .251" diameter keeping a tolerance of >> >> +/- .001" _without_ using a reamer, instead using an endmill probably >> >> about .247" diameter. The hole is cross-drilled, using the x-y axes, >> >> BTW. KTHX. >> >> >> >> Teh Helix Would Be: Start Point UP here, End Point DOWN Here, Wit LOtso >> >> Squiggly's Along TEh way. >> > >> > My late ex-husband was an R&D machinist and used to make something that >> > sounds like that. He called them impellers. He said they were hideously >> > difficult to set up. >> > >> > Smee >> >> Whatever happened to casting? do the mold once and fuggedaboudit. > > Prototypes. > > Smee Ah, I glided right over the "R&D" . . . . And that does sound nasty, straight from blueprint to shop to tunnel. Over and over again. -- tinmimus99@hotmail.com smeeter 11 or maybe 12 mp 10 mhm 29x13 You want a job and a lizard to ride? < _The Einstein Intersection_
On Jan 30, 8:16 pm, psykoexgirlfriend <psykoexgirlfri...@hotmail.com> wrote: > <psciss...@sbcglobal.net> wrote in news:nVVnj.1879$uE.86 > @newssvr22.news.prodigy.net: > > > > > > > "Slipped Moebius" <erroneouscorrect...@yahoo.com> wrote in message > >news:6ce0ad4d-b5c3-407c-8468-691954400ed6@q21g2000hsa.googlegroups.com... > >> On Jan 29, 5:11 pm, mimus <tinmimu...@hotmail.com> wrote: > >> > On Tue, 29 Jan 2008 14:49:35 -0800, Slipped Moebius wrote: > >> > > A program to do helical interpolation on a Nomura NN20-YB Swiss CNC > >> > > with a Mitsubishi Meldas PLC. > > >> > > Why don't some of you nerdcore muthafuckas google it and learn a new > >> > > career. > > >> > What helices are you interpolating, and why? > > >> I'm trying to ream a hole (hold the laughter) through 3/4" 17-4 > >> precipitation hardened steel at .251" diameter keeping a tolerance of > >> +/- .001" _without_ using a reamer, instead using an endmill probably > >> about .247" diameter. The hole is cross-drilled, using the x-y axes, > >> BTW. KTHX. > > >> Teh Helix Would Be: Start Point UP here, End Point DOWN Here, Wit > >> LOtso Squiggly's Along TEh way. > > > My late ex-husband was an R&D machinist and used to make something that > > sounds like that. He called them impellers. He said they were hideously > > difficult to set up. > > > Smee > > i saw you name and i thought good..Smee is going to pointy stick them > for being way to technical jargon-wise to poast this here. > > but no... > no pointy stick and i am sure what you said made some sense to them. > them being those jargon speaking smart in math and stuff bastards. > > thinking where is my pointy stick to pointy stick the lot of you. > > headkase The answer is simply as follows: G19 G02 (G03) Xx/Uu Yy/Vv Zz/Ww Ii Jj Kk Ff Goodnight, thanks for coming. -- Slipped Moebius mhm28x9
